Citizens Connected ADB 5721 Manual de usuario descargar pdf (Pagina 15)

www.urcsupport.com

4. Place the Potenza ST Remote Control head-to-

head (about 2" apart) from your original

remote control. Also locate the key (on your

original remote control) that you want the

Potenza ST Universal Remote Control to learn.

5. On the original remote, press and hold the key

to be learned. The Potenza ST Remote

Control’s LED will blink rapidly, then turn off.

Continue holding the key on the original

remote until the LED blinks twice.

NOTE: If the LED displays one long blink, a learning

error has occurred. Try repeating this step

again until a successful capture occurs. If the

function is still not captured, press and hold

SETUP to exit programming and review the

“Learning Precautions” on the previous page.

If needed, also see “Troubleshooting” on

page 24. After review, start programming

again at step 1.

Deleting a Single Learning Key

his process returns the key to its original programmin

for the mode you select. You can also delete learned

programming by teaching a different function to the key

(see “Programming a Learned Key” on page 14)

NOTE: If more than 15 seconds pass between key

presses, the remote exits programming.

6. Repeat steps 2 through 5 for another mode

and/or key or press and hold SETUP until the

active mode key LED blinks twice to exit

programming.

1. Press and hold SETUP until the last-selected

mode key blinks twice, then press 9 7 6.

2. Press a mode key once (i.e., VCR, DVD, AUD,

TV, or STB). The LED on the selected mode

key will blink once.

Nebula Potenza ST.fm Page 15 Monday, October 15, 2007 4:55 PM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

Sin comentarios

Citizens Connected ADB 5721 Manual de usuario Pagina 15